Acrylic has a lot of tone method if there is a reflection of some of the reflection effect of light matt light control if it is light, then give some refraction refraction blurred. In addition, the diffuse reflection is basically transferred to black, reflected to 180 or so to blur to 0.98 and then to reflect the Fitzer's reflection but if you want and the figure is almost the same, remember to have a reflection of the object opposite the phone, so material effect Will come out otherwise do not see the effect ..
Heilongjiang news channel advertising agency can do a good job for you publicity.
Acrylic (Acrylic) Laser Cutting Significant Advantages ::
1. High precision: positioning accuracy of 0.05mm, repeat positioning accuracy of 0.02 mm
2. Slit narrow: laser beam focused into a small spot, so that the focus to achieve a high power density, the material quickly heated to the degree of gasification, evaporation holes. As the beam and the material relative to the linear movement, so that the hole to form a narrow width of the slit. The width of the incision is generally 0.10 to 0.20 mm.
3. Smooth surface: cutting surface without burrs, incision surface roughness is generally controlled within Ra12.5.
4. Fast: cutting speed of up to 10m / min, the maximum positioning speed of up to 70m / min, much faster than the line cutting speed.
5. Cutting quality: no contact cutting, trimming heat affected very small, basically no workpiece thermal deformation, completely avoid the formation of the material when the collapse of the shear, slits generally do not need secondary processing.
6. Do not damage the workpiece: laser cutting head will not contact with the material surface, to ensure that do not scratch the workpiece.
7. Not subject to the hardness of the material being cut: the laser can be steel, stainless steel, aluminum alloy, carbide and other processing, no matter what kind of hardness, can be no deformation cutting.
8. Not affected by the shape of the workpiece: laser processing is flexible, you can process any pattern, you can cut pipe and other profiles.
9. Save material: the use of computer programming, you can put the shape of the product of the entire board of materials cut, to maximize the utilization of materials. 10. To improve the development of new products: product drawings, immediately after the laser processing, in the shortest possible time to get the new product in kind. 11. Can be non-metallic cutting: such as plastic, wood, PVC, leather, textiles, acrylic (acrylic) and so on.
12. Save mold investment: laser processing without mold, no mold consumption, no need to repair the mold, saving the replacement mold time, thus saving processing costs, reducing production costs, especially for large products processing.
