Acrylic production of small knowledge of acrylic manufacturers
Acrylic board can be divided into the production process can be divided into Mitsubishi board and Guangshun board , Mitsubishi plate and Guangshun board both are transparent and relatively high resistance of a plate, manufactured products quite high, slightly Better than Guangshun board, but the price is relative. Moreover, casting and extrusion casting type of plate performance is better than the extrusion type, casting type of sheet is mainly used for sculpture, decoration, handicraft production, extrusion type is usually used for advertising signs, light boxes and other production, now Ouke acrylic production manufacturers professionals to introduce you to the mechanical performance of acrylic.
When the Master uses an acrylic plate, it is important to measure the mechanical properties of the material used. Acrylic as a kind of decades of high quality plastic materials, in recent years with its production, processing technology is improving, in the ever-changing advertising industry brand market position can be described as flourishing. Acrylic signs look novel, diverse design, compelling, and gradually occupy the growing high-end light box signs market share, and become the preferred brand of many well-known enterprises.
In the production of large light boxes, to consider the elevation of the wind bear, be sure to leave the balance, not only to consider the normal conditions of use, but also consider the use of light boxes, which is very important. In most countries, national standards have been developed for building signs of resistance to wind carriers. Light box base material is equivalent to the equivalent of the foundation of the building, the material selection is correct, it means that half of the success.
For designers, when considering the use of traditional materials, such as metal, most of the design formula to note the following points:
1, the material has a linear stress / tension curve
2, in the loading process generated by the small deflection
Many thermoplastic materials usually do not have a linear stress / tension curve, but the acrylic is quite satisfactory at this point. Before designing a signboard, know the maximum expected temperature.
