First, the thermal deformation of ordinary organic glass plate is stable at about 100 degrees, so pay attention to this temperature value when using plexiglass products, such as the temperature should not be higher than 90 degrees in continuous use.
Second, the hardness of the surface of organic glass products is equivalent to aluminum, so care should be taken to avoid scratching the surface when using or acrylic processing. If scratched, it can be restored to its original shiny surface by polishing.
Third, in the slight scratch or electrostatic adsorption dust caused by the acrylic products blurred or unclean can use 1% of soapy water in the soft rag with the wiping it clean.
Fourth, this is the detail that needs to be noticed in the assembly process of the acrylic products. Because the acrylic sheet has a certain coefficient of expansion, the thermal expansion and contraction of the acrylic sheet must be taken into consideration during assembly. There must be a flexible space gap.
