How to distinguish acrylic sheet and PS material
There are more and more acrylic products on the market. I believe everyone has some understanding of the basic performance of acrylic, but everyone maybe not know the acrylic board and ps board well. These two materials are very similar to acrylic in appearance, which leads to Some unscrupulous merchants use ps and pc boards to confuse acrylic.
In order to avoid unnecessary losses for everyone, I will introduce how to identify these materials.
please see the following explanations:
At present, the plastic materials used in China are very high, and plastic is a big market. Among them, acrylic, pc, ps, ms, and boards are in the most demanded. The prices of these types of boards are different. For people who are not insiders, it is necessary to distinguish between these types.
There are still some difficulties in the board, and the exquisite display will teach you a few simple methods to quickly identify different boards.
First: Plexiglass (acrylic) is respectively: extruded board and cast board, the identification of the extruded board is the transparency number. Using the most primitive identification method, the fire is burning, the flame is clear when burning, there is no smoke, there are bubbles, and the filament can be pulled out when extinguishing the fire.The identification of the casting plate is: higher transparency, no smoke, bubbles, squeaking sound when burning with fire, and no wire when extinguishing fire.
Second: PC endurance board, the identification method is: high transparency, good impact resistance, not broken, burning with fire is basically not burnt, flame retardant, and will emit partially black smoke.
Third: PS organic board, the identification method is: the transparency is normal, there will be pitting when it is reflected. Relatively brittle and easy to break. There will be a clicking sound when hitting the ground. When burning with fire, a lot of black smoke will be produced.
