How to glue plexiglass without bubbles?
1, plexiglass plate in the erosion by the adhesive will leave a difficult to remove the traces, so we can use stickers to protect the sticky parts;
2, some grease, dust or air bubbles will hinder the uniform application of adhesive leaving bubbles, then you can use the cleaning method to be removed;
3, too little use of the adhesive will make the sticky surface can not be completely slow, or in the adhesive curing shrink into the air and affect the appearance;
4, direct hair will make the edge of the sticky section of the adhesive due to the rapid evaporation and white;
5, indoor humidity, temperature, etc. will have a direct impact on the adhesion of plexiglass products;
6, the stress on the surface of the acrylic plate and the surface stress and degradation caused by the cutting tool will affect the bonding effect of the plexiglass plate;
7, plexiglass products with adhesive bonding in the failure to fully cured before the direct sunlight by the sun will make plexiglass products in varying degrees of yellowing, will seriously affect the appearance of acrylic products.
