OUKE explain the extrusion and pouring plate distinction method for you
OUKE Acrylic manufacturers tell you how to distinguish between interpretation:
1, from the point of view of raw materials: now in the domestic phenomenon is: the basic use of the extrusion board is to do the material to do, pouring the board is a new material to do.
2, from the laser when the smell produced: the first point that the extrusion board is basically used to do the recovery of materials, so the cutting will be more unpleasant, smoke is also relatively large, especially the pigment plate and those Core plate; pouring plate because it is a new material, so whether it is smell or smoke will be a lot less squeeze board.
3, from the perspective of thickness: extrusion plate thickness uniformity, and pouring board in the same sheet often appear uneven thickness of the phenomenon, which is two before the production process is not the same cause.
4, from the surface of the acrylic plate to see: the surface of the extruded plate will have some trachoma, is a little bit of the same hole down, the black plate will look very obvious, and the pouring plate will not appear such a situation, but pouring Board will appear watermark situation.
5, from the perspective of bending processing: extrusion plate in the heating easily blistering, this area will be better than the extrusion board plate.
6, from the perspective of transparent board, the transparency of the pouring plate than the extrusion plate.
7, from the price point of view: the price of pouring board will be higher than the price of extruded board.
