1.Acrylic products in the continuous use of the temperature should not be higher than 90 degrees, because the ordinary acrylic plate thermal deformation is stable at about 100 degrees, so to avoid high-temperature deformation of acrylic.
2, in the use of acrylic processing should be careful to avoid scratching the surface, the hardness of the surface of acrylic products is equivalent to aluminum, it is prone to scratches, if it can be scratched by polishing to restore the original shiny surface.
3.Acrylic products may be obscured or unclean due to slight scratches or adsorption of dust due to static electricity. You can use 1% soapy water to wipe it off with a soft cloth.
4.Because the acrylic sheet has a certain coefficient of expansion, the thermal expansion and contraction of the acrylic sheet must be taken into account during installation, and there must be a retractable space gap when assembling. This is the detail that needs to be noticed during the assembly of acrylic products.
