Acrylic Box Maintenance of acrylic products
I believe that the use of acrylic products friends know that acrylic products with anti-corrosion, high temperature effect, high transparency is the professional as "the mother of crystal" title; then, you know about the maintenance of acrylic products ? Speaking of maintenance, there must be many people will think of our daily life in their own maintenance of some of it; you may also have questions: this and our own what is the relationship
I believe we should all understand the world all things it is life, in good things, if not to maintain and maintain it, a long time will slowly lose the original glory; so that before the problem, we It is better to do a good job in advance of the work; in order to help you solve this problem, the company based on years of experience made a series of tests, the effect is very good, the following to share to you:
3 great secret maintenance acrylic products
The first point:
The first is the acrylic products clean; because acrylic products are generally more than 92% light transmission, in order to maintain its original glory, we are cleaning, we must use a special cleaning agent, pay attention to the concentration should not be too high; Because the concentration is too high, over time will lead to the surface of the acrylic layer of loss of luster, so the best way is to use the concentration of about 1% of soapy water as clean, so that both save money waste, but also to maintain the color of acrylic Change, serve two purposes
Second point:
Acrylic products to maintain the temperature; although that acrylic products are very strong high temperature function, but do not have a long time to put it in the hot sun, and relatively cold location; because the acrylic material in such an overloaded environment , It will be seriously damaged, so the thermal expansion and contraction is the resulting, so the best temperature should be kept at 80% -90% or so for the best.
The third point:
Acrylic products are stored in the location; we should also know that anything has its own advantages and disadvantages, such as organic solvents, is part of the acrylic products of the phase grams; because the acrylic is called a polymethyl methacrylate chemical Made, because both contain a certain chemical composition, if often put together, it will make the two compatible, so that the damage to the acrylic products is very large; therefore, it is necessary to avoid exposure to acrylic products Such products.
1, the normal deformation of the acrylic plate is about 100 degrees near the stability, so the use of plexiglass products should pay attention to the temperature when the temperature, if the continuous use of the best temperature should not be higher than 90 degrees.
2, the hardness of the surface of acrylic products with aluminum almost, so in the use or plexiglass processing, we must be careful to avoid the surface was hard to scratch. If the ministry is carefully scratched we can still restore the original glossy surface by polishing.
3, there is a slight scratch of acrylic or electrostatic dust generated by the resulting acrylic products blurred or impermeable when you can use one percent of the soapy water in the soft wipes with the wipe it wipe clean.
4, acrylic products during the assembly process should pay attention to the thermal expansion and contraction of acrylic sheet factors, so the time of installation need to take into account when the assembly must be left in the appropriate space for the expansion of space.
