1.The thermal deformation of ordinary acrylic plates is about 100 degrees. When using acrylic products, it is necessary to pay attention to this temperature value. When it is continuously used, the temperature should not exceed 90 degrees.
2.The hardness of the surface of acrylic products is equivalent to aluminum. When using acrylic or acrylic processing, care should be taken to avoid scratches on the surface. If scratched, it can be restored to its original shiny surface by polishing.
3.Blurred or unclean acrylic products caused by slight scratches or adsorption of dust due to static electricity. You can use 1% of soapy water to wipe it clean with the help of a soft cloth.
4. Acrylic products should pay attention to the assembly of acrylic sheet has a certain coefficient of expansion, to take into account the thermal expansion and contraction of acrylic sheet factor, when assembling must leave a space expansion and contraction.
