In the usual advertising show, in addition to the common electronic screen, LED and other forms appear, in fact, more is still using the acrylic display and Yi Labao such a display tool. The growth of market demand has spawned the fiery development of the acrylic display industry. Next, we will explore the production of acrylic display shelf knowledge.
Acrylic display stand overview:
Acrylic display stand production specifications: commonly used are 60cm x 160cm, 80cm x 180cm two.
X display stand advantages: easy to operate, easy to carry, when the production is completed, the shelves can be folded up and take away, the weight is not large. Advertising screen with ordinary photo paper pinyin can, of course, this is only conventional materials, and some need according to customer requirements, and some use of paper prints, after the end, attached to the film above, this production although the effect and hardness are Reached, but in contrast, the cost will increase.
Disadvantages: X display racks are basically made of plastic, especially in the middle of the cross section, plastic products are vulnerable features, which between the invisible to shorten the display and advertising screen life.
Display stand production:
There is no difference between the production of the advertising screen and the production of the usual picture, the only difference is that the picture after the production of the general and advertising materials in the board in combination with the use, and the four corners do not have to punch, but X show the advertising screen is not The same, first in the advertising material, the requirements must have hardness, hardness is too small material is not conducive to the X display stand support. So the general use of photo paper to produce, in addition, X-shelf four corners need to punch, and only this can be used in conjunction with the X-display, in order to support them.
On the advertising screen hole problem:
X display stand when the hole, it is best in the need to punch the back of the screen with sticky stickers on the 5-6 layer, so as not to support up when it will shorten the service life. In addition, the margins of the perforations are generally kept at about 5 cm.
