Acrylic Furniture Cutting performance
As the acrylic has a unique physical characteristics, so the ambient temperature and humidity have certain requirements.
1, with good cutting performance, can be measured in a good size under the conditions of laser cutting processing, so acrylic products can withstand high temperature and low temperature of the environment, consumers in the production process do not have to worry about the temperature problem.
2, acrylic is an invisible polymer, its range of contraction are reduced, are generally in the 0.45% -0.9, so the acrylic production of precision molding time to provide a very good condition, under normal circumstances are forming Very accurate.
3, made of polymethylmethacrylate cresol, polymethyl methacrylate containing polar side methyl, with a strong hygroscopic properties, water absorption in the acrylic sheet must always be kept dry, dry conditions required is 78 ℃ -80 Lt; 0 & gt; C for 5-6 h.
4, the temperature of the acrylic process in the flow are generally around 150 ℃, but when the acrylic products began to break down when the temperature is higher than 270 ℃, so that the temperature changes are still very flexible, not subject to temperature The impact of production, high temperature is the characteristics of acrylic.
5, by the polymethyl methacrylate to the ambient temperature of the scope of adaptation does not have a common fluid, but with non-Newtonian fluid, so the case of high temperature, acrylic viscosity will be reduced, which is acrylic products on the The temperature is very sensitive to the performance of acrylic products can be long to maintain the brightness of it? Of course, acrylic material with corrosion-resistant products, hardness is good to maintain long-term non-fade and other advantages, you want to maintain the original brightness of acrylic products, Cleaning and maintenance of two maintenance methods.
Care spray wax and cleaning and maintenance agent before use, it is better to shake it, and then straight grip spray cans, so that the liquid components in the tank can be completely without pressure in the state was released. After the dry cloth at a distance of about 15 Centimeters of the place gently spray, so again to wipe the product, can play a very good cleaning and maintenance effect
Indeed, although the acrylic display shelf is extremely transparent, but also easy to dirty, the surface is also easy to scratch, which affects the image of the product display, so this requires us to cherish, but not too complicated, you Only need to understand a little common sense, learn the above cleaning method on the OK.
