How to glue plexiglass without bubbles?
1, plexiglass plate in the erosion of the adhesive will be left when the traces of difficult to remove, so we can use stickers to protect the site does not need to stick to;
2, some grease, dust or air bubbles will hinder the uniform application of adhesive leaving bubbles, then you can use the cleaning method to be removed;
3, too little use of the adhesive will make the sticky surface can not be completely slow, or in the adhesive curing shrink into the air and affect the appearance;
4, direct hair will make the edge of the sticky section of the adhesive due to the rapid evaporation and white;
5, indoor humidity, temperature and so on will plexiglass products caused a direct impact on the bonding;
6, the stress on the surface of the acrylic plate and the surface stress and degradation caused by the cutting tool will affect the bonding effect of the plexiglass plate;
7, plexiglass products with adhesive bonding in the failure to fully cured before the direct sunlight by the sun will make plexiglass products in varying degrees of yellowing, will seriously affect the appearance of acrylic products.
