Processing of Acrylic Products - Acrylic Factory
We see in the market of acrylic products are perfect bright. In fact, before the plexiglass is fully formed, it is necessary to go through a number of technical processing to have such a beautiful appearance.
Acrylic sheet first cut, according to the requirements with the size to cut out the style. General cutting is the use of laser cutting, not only to speed up the efficiency of processing, but also to maximize the degree of accuracy, with the smallest degree to reduce the loss. In the case of acrylic surface treatment. Acrylic acrylic process before the treatment there are many ways, according to the surface of the style, can be divided into transparent polishing, sandblasting, sand, stripes and so on.
The most common is the polished, polished acrylic material after the glory of Kam, such as crystal-like shine. Early polishing is just to overcome some of the surface defects of plexiglass materials, improve the surface finish, and now the basic products will be polished, in order to have a better sale, is no longer pure to make up for the defect. General use of mechanical polishing, that is, cloth round polishing, polishing is also a number of technical content, sophisticated polishing skilled not only greatly improved, and threw out the effect is also better.
There is sandblasting. Sandblasting is to increase the adhesion of the plexiglass process ink to the acrylic process. Sandblasting is usually done using a special blasting machine for jetting. Such as 0.5-1 mm thick aluminum, plexiglass sandblasting sand with a diameter of 0.05-0.15 mm, can also be used to process sand, the screen can be used after filtration.
