Skill Introduction Of Acrylic Display Rack production
Picture Of Acrylic Display Rack
Acrylic Showcase Overview:
Acrylic display frame production specifications: commonly used 60cm x 160cm, 80cm x 180cm two.
X show the advantages of the exhibition: easy to operate, easy to carry, when the production is completed, the shelf can be folded away, the weight is not large. Advertising screen with ordinary photo paper pinyin can, of course, this is only conventional materials, and some need according to customer requirements, and some use of print paper printing, after the end, attached to the film above, so the production of both the effect and hardness Reached, but in contrast, the cost will increase.
Disadvantages: X display racks are basically made of plastic, especially in the middle of the cross section, plastic products are vulnerable features, which is short between the expansion of the exhibition and advertising screen life.
Showcase production:
There is no difference between the production of the advertising screen and the production of the usual picture. The only difference is that the pictorial picture is used in combination with the board in the advertising material after making it, and the four corners do not have to be perforated, but the advertisement screen of the X The same, first in the advertising material, the requirements must be hardness, hardness is too small material is not conducive to X-shelf support. So the general use of photo paper to produce, in addition, X-shelf four corners need to punch, and only this can be used in conjunction with the X-display, in order to support them.
On the advertising screen hole problem:
X show rack when the hole, it is best to punch the back of the screen with a sticky note on the back 5-6 layer, so as not to support up when it will shorten the service life. Another hole in the hole under the general situation to maintain about 5cm is appropriate.
