the use of plexiglass panels is very wide, such as household appliances, display screens, game consoles, card machines and other equipment are used on the plexiglass panels, compared to plastic panels, plexiglass panels with high hardness is not fragile,
good temperature And so on, so now a lot of equipment panels will be used plexiglass processing production.
The following product peak technology to tell you about the production process of plexiglass panels.
1, carving: acrylic panel with different uses, the size is large and small, but basically are not too large,
and a plexiglass plate size is 2.44x1.5m, so use the engraving machine to plexiglass plate Cut into the
appropriate size.
2, polished: cut after the edge of the acrylic sheet is very rough, not only unsightly and easy to scratch
the hand, which must be polished to restore a certain degree of smoothness.
3, silk screen: the color of acrylic panel are silk screen up, plexiglass panels are the same, the panel
is made of transparent plexiglass processing, especially as a screen of plexiglass panels, in addition to the
display area requires transparency, the other places can not be transparent And printed with color.
4: Punching: Some panels are screwed to the device, the perpex also relative to the left with a
screw hole for installation, the common hole can be used engraving machine drilling, and with a threaded
hole to First drill with a small hole engraving machine, and then take the thread with a drill drill drill
thread.
5, membrane: acrylic panel in the factory need to have a layer of protective film to avoid transit or
use scratches, scratches, resulting in the entire panel of scrapped.
