Home Furnishing decoration in the process requires the use of decoration materials is very much, sometimes we even heard of, such as acrylic sheet, I believe many people hear the word do not know what it is, for it uses a lot of people do not know? In fact, the use of acrylic plate in the decoration is very frequent. Next to come to understand in detail the acrylic plate how to cut good? What are the problems that should be paid attention to when the acrylic board is sticky?
How to cut acrylic plate?
1, you can use three to four new wallpaper blade, first neatly stacked together, in the lower part of the tape fixed, must be neat;
2, and then use the wallpaper knife head on the back of the tip (each blade on the back of the head has a small depression pocket) to delimit the part you want to bend, must make the strength of all, with a ruler of a row, until the acrylic plate thickness of 1 / 2-1 / 3 of the degree;
3, after the trough, with a blower (for a spotlight centralized wind) blowing, can also be baked with wax head, not baked paste. And then ninety percent off, fold it. Because of the blade, the bending is very straight.
4. acrylic board can not be stored with other organic solvents, not contact with organic solvents. In the process of transportation, not the surface protective films or scratch paper. Can not be used in the temperature of more than 85 degrees Celsius environment. Clean acrylic sheet only with 1% soap water, with soft cotton cloth dipped soap water, can not use hard or dry wipe, otherwise the surface is easy to be scratched. The thermal expansion coefficient of acrylic plate is very large, and the retractable clearance should be considered due to the temperature variation.
What are the problems that should be paid attention to when the acrylic board is sticky?
1, acrylic adhesive can corrode the surface of the acrylic board, and leave traces that are difficult to eliminate, so you can use stickers method to protect the parts need not be bonded.
2, grease, dust or pores will be bonded, difficult to evenly coated and leave bubbles, so must be removed before bonding.
3. When adhesive is used too little, the adhesive will bring air into the air when the adhesive is contracted.
4, the direct blow will make the edge of the bonding surface whitening due to the rapid evaporation of adhesives.
5, indoor temperature, temperature and other factors also have a certain impact on the acrylic plate bonding.
6, the stress on the surface of the acrylic plate and the surface stress and degradation caused by the cutting tool will affect the bonding effect of the acrylic plate.
7, before the adhesive is not completely cured, the direct exposure to sunlight for a long time, will make acrylic products to varying degrees of yellowing, will seriously affect the acrylic products (acrylic light-emitting word, acrylic lamp box) beautiful.
After the introduction of the above article, how do you cut the acrylic board? What are the problems that should be paid attention to when the acrylic board is sticky? You should know something about it. Here, Xiao Bian to remind you, if you want to cut their own acrylic board, must be careful, do not let the knife scratch the skin. Personal safety issues must be paid attention to. Hope small introduction can help you.
