The difference between imported acrylic and domestic acrylic

We all know that, in general, imported and domestic goods are always some differences, and acrylic is no exception. Imports of acrylic materials and domestic acrylic materials using the production of acrylic display stand products, then there will be very different. Next to introduce the difference between the import of acrylic and domestic acrylic. Imported acrylic and domestic acrylic materials have the following differences:

1. gloss different: the imported surface is very bright and smooth. While the domestic light reflex is not very good.

2. Hardness: the import is relatively soft, not easy to be crushed or hit bad. Made relatively hard.

3. made acrylic material easier to color.

4. Open the outer packaging, that is, protective film, look inside the material and quality, it is best to polish the best distinction, see the effect of polishing out, if the yellow back to the material, which will be yellow resin.

5. The thickness of the imported plate is stable at about 0.1 to about 0.2, and the plate is small; the thickness of the domestic plate is unstable and the difference is at 0.5, and some bubbles are more unstable.

6. raw materials are different: the domestic more in the production of acrylic when the back to the material, do not believe when you buy a low price and is a new material of acrylic, you have to believe that a penny of goods. If there is a good goods, then good goods is not cheap. While imports such as Degussa plexiglas itself is the PMMA raw material provider, able to provide high-quality MMA raw material monomer, made out of the acrylic nature is also high quality acrylic, natural, it's high prices this is certain.

7. Product quality is different: made with two or three years of yellow, cracking, normal, but there is a problem: tolerance control is not ideal, uneven thickness is a common problem of domestic plate. Imported acrylic with high-tech content, can be almost almost the thickness of the surface crystal translucent.

Above is the introduction of acrylic and domestic acrylic difference in detail. In our factory production and processing of acrylic display stand, there will be a one-on-one service, first understand the customer's products and display sites, and then by our designers to do structural design and design, understanding of customer needs because of this show The choice of material is essential.

These methods can help you to better identify the difference between import and domestic.