What is the effect of screen printing grid distance on acrylic quality?
The plexiglass screen printing mesh distance is also called the screen spacing, which is the vertical distance between the bottom surface of the screen printing plate and the surface of the plexiglass product. It is the main five variables in the screen printing (scraper hardness, mesh distance, printing speed, One of the shaving pressure, the suitability of the ink. In screen printing, the space between the printing plate and the plexiglass is the key to ensuring that the screen printing plate is not stuck to the substrate during the printing process.
If the screen is stuck with the plexiglass, it will cause many problems. The mesh distance solves this problem. In the printing process, it can make the screen only contact the plexiglass material at the edge of the squeegee, and the squeegee Through this area, there is a stripping zone where the screen separates from the plexiglass material, leaving a clear print. Peeling refers to the upward separation movement gradually generated by the frame during the printing stroke, which occurs when the squeegee is in motion at the starting point of the squeegeing stroke and during the printing cycle, and moves the screen until it contacts each shims. Use different shims to adjust different mesh distances, or use the calibration wedge to adjust the mesh distance, which is better in accuracy and versatility.
